Antifreeze coolant Glicar G12 Concentrate

Antifreeze coolant Glicar G11 Concentrate is not a ready-to-use product. Before applying to the engine cooling system, it should be diluted with demineralized water in a 1:1 ratio. Detailed instructions for this process can be found in the “Dilution” tab. You should not use undiluted concentrate, but you should also not use excessively diluted liquids. Dilution in proportions other than those recommended by the manufacturer may impair the operation of the cooling system, expose it to premature wear, and even lead to damage to the cooled drive unit through overheating.

GLICAR G12 Radiator Fluid Concentrate is produced on the basis of mono ethylene glycol (MEG). Only primary raw material not originating from recovery or recycling processes is used for production. As a result, the resulting product boasts high performance parameters. The product is completely free of glycerin, which is not used at any stage of production. The product is enriched with numerous enriching additives and corrosion inhibitors. Thanks to such a unique recipe, which is the result of ten years of experience, the manufacturer can guarantee full protection of the cooling system for 5 years or 250,000 km of continuous operation. A inhibitory korozji i uszlachetniacze konserwują i zabezpieczają przed korozja oraz przedwczesnym zużyciem zarówno elementy metalowe jak i te wykonane z gumy czy plastiku. Ensuring long-term and failure-free operation of the cooling system. The liquid created by diluting the concentrate does not foam. This is ensured by carefully selected anti-foaming ingredients. This guarantees complete elimination of problems resulting from the presence of foam in the cooling system.

After diluting GLICAR G12 Concentrate, the resulting liquid can be used in the cooling systems of stationary engines. However, the basic task of GLICAR G12 fluid is to cool engines installed in vehicles. Starting from motorcycles and boats and other recreational vehicles, through passenger cars, taxis, police cars and other intensively used vehicles, to trucks and buses. However, this is not the end of the applications of GLICAR G12 fluid. It is a great choice for construction equipment and machines, tractors and agricultural equipment, military and special-purpose vehicles. Wherever liquid cooling of an internal combustion engine is required, a coolant based on GLICAR G12 Concentrate can be used, unless the engine manufacturer’s specifications say otherwise.

UV marker! At the customer’s request, the standard product formula can be enriched with a UV dye. The addition of a UV dye causes the liquid to “glow” when illuminated with UV rays. The light source with the UV spectrum may be a specialized flashlight or banknote tester, gemological flashlight, etc. The glowing liquid makes testing the system for leaks very easy, even for a layman. Large leaks from the cooling system are quite easy to detect. However, smaller leaks, especially those hidden in hard-to-reach corners of the system, can be a big problem during diagnosis. No, if the liquid has a UV tag. Just illuminate the darkened part of the system with light containing the UV spectrum, and even the smallest droplet emerging from the smallest leak will begin to glow with bright, brilliant light. On the other hand, the lack of any effect after lighting the cooling system gives us confidence that the system is tight. The manufacturer recommends using a UV marker in every cooling system.

Color. Antifreeze coolant Glicar G12 Concentrate is available in red. The color of the liquid is obtained by adding natural mineral pigments. The pigments used to color the liquid do not affect the functional properties of the product and do not change the physical and chemical properties of the product.

The liquid obtained from diluting the GLICAR G12 Concentrate can be used in radiators made of brass, copper (including soldered ones) and aluminum.