CHARACTERISTICS

Concentrated formula
Effectively protects the cooling system for 5 years
It must be diluted 1:1 with demineralized water
Contains a package of corrosion inhibitors and anti-foaming agents
Intended for use in the cooling systems of all types of internal combustion engines
Based on OAT technology
The product meets the following standards: PN93/C-40008-10; PN-C-40007; ASTM D 5931- 13; ASTM D 1287-11; PN 93/C-40008-05; PN-C- 40008-06:1993/AZ 1:2000
Complies with the standards: VW GROUP (AUDI, SEAT, SKODA, VOLKSWAGEN) TL-774 D; ASTM D3306; BS 6580:2010; ASTM D 4985; ASTM D 6210; DAF 74002; FORD WSS-M97-844 D; Man 324 SNF; MB APPROVAL 326.3; RENAULT 41-01-001/- S TYPE D; SAE J 1034; VOLVO COOLANT VCS; FIAT 9.55523

Available packages:

SZCZEGÓŁY

GLICAR G12 is a high-quality engine coolant concentrate designed for modern internal combustion engine cooling systems. The product must be diluted with demineralized water at a 1:1 ratio before use. Once prepared, it provides reliable protection against freezing down to -35°C, corrosion, deposits, and premature wear of cooling system components.

Applications
The coolant prepared from GLICAR G12 Concentrate is suitable for cooling systems in:

passenger cars,
light commercial vehicles,
trucks,
buses,
motorcycles and scooters,
ATVs and recreational vehicles,
construction machinery,
agricultural machinery and tractors,
military and special-purpose vehicles,
power generators and stationary engines.

Suitable for gasoline, diesel, and LPG-powered engines.

Material Compatibility
The coolant prepared from GLICAR G12 Concentrate is suitable for cooling systems made of:

aluminum,
copper,
brass,
soldered radiators.

Its advanced formula, based on monoethylene glycol (MEG), corrosion inhibitors, and performance-enhancing additives, provides long-lasting protection for metal, rubber, and plastic components.

Dilution
GLICAR G12 Concentrate is not a ready-to-use product and must be diluted with demineralized water at a 1:1 ratio before use.
Mixing example:

1 liter of concentrate + 1 liter of demineralized water = 2 liters of ready-to-use coolant.

Only high-quality demineralized water should be used. Maintaining the recommended 1:1 mixing ratio is essential. Using the concentrate undiluted or excessively diluting the mixture may reduce the effectiveness of cooling system protection.

UV Leak Detection Additive
Upon request, the concentrate can be enhanced with a UV tracer dye, allowing quick and accurate detection of cooling system leaks using a UV lamp. The additive does not affect the product’s performance and significantly reduces diagnostic time.

Available Colors
GLICAR G12 Concentrate is supplied as standard in red.
The color is achieved using high-quality pigments that do not affect the physical or chemical properties of the product.

CLP Classification and Labeling
Always read the information provided on the product label before use.
Substances that contribute to the classification Ethanediol.

Hazard Statements
Acute Tox. 4: H302 – Harmful if swallowed.
STOT RE 2: H373 – May cause damage to organs through prolonged or repeated exposure (Oral).

Precautionary Statements
P102: Keep out of reach of children.
P260: Do not breathe mist/vapours/spray.
P264: Wash hands thoroughly after handling
P270: Do not eat, drink or smoke when using this product.
P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P501: Dispose of contents/container according to the separated collection system used in your municipality.

UFI: 2S30-703E-6009-X1X4

Instructions for use:

Dilute the concentrate with demineralized water in a 1:1 volume ratio.
Before filling, drain and flush the cooling system with clean water.
Pour directly into the cold cooling system through the expansion tank.
The level should be between the MIN and MAX marks.
Start the engine and wait until the operating temperature is reached, then switch it off and allow it to cool down. After cooling, check the fluid level and top up if necessary.

Note: The fluid replacement interval is specified in the vehicle owner’s manual.

QR Glicar G12 coolant concentrate

Please send me the product’s technical documentation:

Additional information

BASE COLOR: Blue.
OTHER COLORS AVAILABLE: Green, yellow.
AVAILABLE PACKAGING: 1L bottle; 5L canister; 20L canister; 60L canister; 200L barrel; IBC/IBC 1000L; Bulk in a tanker/tank container.
AVAILABLE EXTRAS: UV additive.
PRIVATE BRAND: Possibility to apply customer labels.

Use

GLICAR G11 radiator fluid is used in cooling systems:

motorcycles,
scooters,
passenger cars,
delivery vans,
trucks,
buses,
construction machinery,
agricultural machinery,
tractors and farm machinery,
military and special-purpose vehicles,
stationary engines.

Advantages

Does not contain glycerin.
Does not freeze. It protects the system against low temperatures down to -35°C.
Protects the system against corrosion.
Protects seals and gaskets from excessive wear.
Preserves and extends the lifespan of both metal and rubber or plastic components of the cooling system.
It does not foam.
It protects the system against scaling and sediment formation.
Designed for use in systems made of most commonly used materials such as:
- aluminum,
- brass,
- copper.
Approved for use in soldered systems.
Available in colors:
- blue,
- green,
- yellow.
May contain UV tag.
It meets the standards:
- PN93/C-40008-10;
- PN-C-40007;
- ASTM D 5931-13;
- ASTM D 1287-11;
- PN 93/C-40008-05;
- PN-C-40008-06:1993/AZ 1:2000.
It meets the requirements of standards:
- AUDI/SEAT/SKODA/VW TL 774 C;
- ANFOR NF R 15-601;
- ASTM D 2570;
- ASTM D 3306;
- ASTM D 4985;
- ASTM D 5345;
- BMW GS 94000;
- BMW N 600 69,0;
- BS 6580:2010;
- DAF 74001;
- Man 324 NF;
- Man 324 NF PRITARDER;
- MB 325.0;
- MB 325.2;
- SAE J814.