Antifreeze coolant Glicar G13 Concentrate is not a ready-to-use product. Before pouring it into the cooler, the product should be diluted with demineralized water in a ratio of 1:1. Details of the process are available in the “Dilution” tab. The concentrate should not be used in undiluted or diluted form in proportions other than those recommended by the manufacturer. Too thick fluid can overload the cooling system, and in extreme cases, damage the engine by overheating. A product that is too diluted does not protect the cooling system against freezing, but also against corrosion of metal parts and premature wear of rubber and plastic elements.
GLICAR G13 radiator fluid concentrate is produced only from the highest quality monoethylene glycol (MEG). No recycled or recycled raw materials are used in the production. The modern formula of the product is based on organic acid technology. In combination with a unique recipe, including numerous additives and corrosion inhibitors, GLICAR G13 is a product of the highest quality. It protects the cooling system against corrosion and cavitation. All rubber elements, gaskets and seals and other parts made of plastic are constantly maintained and protected against premature wear. Moreover, the product is completely free of toxic nitrites, amines or phosphates. The addition of ethylene glycol anti-foaming agents completely eliminates the problems resulting from the presence of foam in the cooling system. The product protects the cooling system from limescale build-up and precipitation.
The coolant prepared on the basis of GLICAR G13 Radiator Fluid Concentrate meets the requirements for low-coagulant fluids for internal combustion engine cooling systems of all manufacturers. The cooling system is protected against temperatures down to -36°C. It can be used in all internal combustion engines, both stationary and those installed in vehicles, powered by traditional fuels – petrol, diesel, LPG.
The highest quality of G13 Concentrate is confirmed by the manufacturer’s warranty for 250 thousand. km of mileage or 5 years of operation.
The product has the following standards: PN93/C-40008-10; PN-C-40007; ASTM D 5931-13; ASTM D 1287-11; PN 93/C-40008-05; PN-C-40008-06:1993/AZ 1:2000.
Meets the requirements for the following standards: Audi/Skoda/VW/Seat TL 774 J, ASTM D 3306, BS 6580:2010
UV Additive
GLICAR G13 radiator fluid concentrate can be enriched with a UV additive at the customer’s request. The UV dye is completely inert to the functional physicochemical properties of the product. The UV additive causes the finished liquid to “glow” in UV rays. Simply darken the cooling system or part of it, illuminate it with light containing the UV spectrum to confirm leakage or detect leakage from the system. The addition of UV dye not only simplifies but also shortens the duration of the diagnostic process. The manufacturer recommends the UV marker as an essential addition to the coolant in every vehicle or stationary engine.
Colour
The product is available in purple. The colour of the product is achieved by adding natural mineral pigments. The pigments that give the product its color are completely indifferent to the functional properties of the product.
Remark
The coolant obtained by diluting GLICAR G13 radiator fluid concentrate can be recommended for systems made of most materials commonly used on the market for the production of car radiators. The product can be safely used in coolers made of aluminum, cast iron or in mixed systems.
+48 733 525 533
dsc@glitherm.com
