Name: Antifreeze coolant Glicar G11 Concentrate
SKU: Gli-0027
Price: 1.00 PLN
Availability: InStock

UV addition

GLICAR G11 Coolant concentrate in IBC, capacity 1000L

GLICAR G11 Concentrate in brief:

Concentrated formula. Easier for transport and storage.
Before use, it must be diluted with demineralized water in a 1:1 ratio.
Does not contain glycerin.
It does not foam.
Protects metal elements against corrosion. Preserves and protects rubber elements, gaskets and seals against accelerated wear.
Approved for use in motorcycles, cars, construction and agricultural machinery and military equipment. Also in stationary engines.
Dedicated to coolers made of brass, copper (also in brazed coolers) and aluminum.
It has the following standards: PN93/C-40008-10;PN-C-40007;ASTM D 5931-13;ASTM D 1287-11;PN 93/C-40008-05;PN-C-4008-06:1993/AZ 1 :2000 .
Meets the requirements of the AUDI/SEAT/SKODA/VW TL 774 C, ASTM D3306, BS 6580:2010, ASTM D 4985, ASTM D 5345, ASTAM D 2570, ANFOR NF R 15-601, DAF 74001, and Man 324 NF standards, , Man 324 NF PRITARDER, MB 325.0, 325.2, SAE J 814.

Kolor podstawowy:

Inne dostępne kolory:

Dostępne opakowania:

Clear

SZCZEGÓŁY

Antifreeze coolant Glicar G11 Concentrate is not a finished product. Before use, it should be diluted with demineralized water in a 1:1 ratio. Detailed instructions for diluting the product are available in the “Dilution” tab. The manufacturer strongly advises against using the product undiluted or diluted in proportions other than the recommended 1:1 with demineralized water. Using the product undiluted may result in loss of its functional properties and even damage to the cooling system.

GLICAR G11 Coolant Concentrate is a high-quality product addressed to the most demanding customers. GLICAR G11 coolant obtained after diluting the concentrate protects the radiator and cooling system components against low temperatures down to -35°C. The unique composition enriched with numerous refiners and corrosion inhibitors guarantees almost full protection of metal elements against corrosion. Rubber elements, gaskets and seals are not only protected, but also maintained, which eliminates problems with premature aging of these elements. Anti-foam additives prevent the liquid from foaming both when filling the radiator and during operation. By using GLICAR G11 in your radiator, you will avoid problems caused by foaming of the working medium.

Glicar G11 fluid can be used in a wide range of combustion engines. Starting from engines powering scooters and motorcycles, through passenger cars, vans and minibuses, delivery cars and trucks, buses, to less obvious structures such as campers, military vehicles and equipment, tractors and agricultural or construction machines. GLICAR G11 is a product intended for cooling systems of engines powered by gasoline, diesel oil, LPG, and other less conventional fuels – if the specification of such an engine allows it. GLICAR G11 coolant can be successfully used in stationary engines, e.g. power generators or field, civil and military power plants.

The product meets the standards: PN93/C-40008-10;PN-C-40007;ASTM D 5931-13;ASTM D 1287-11;PN 93/C-40008-05;PN-C-4008-06:1993/AZ 1:2000 .

The liquid obtained after diluting the concentrate meets the requirements of the AUDI/SEAT/SKODA/VW TL 774 C, ASTM D3306, BS 6580:2010, ASTM D 4985, ASTM D 5345, ASTAM D 2570, ANFOR NF R 15-601, DAF 74001, and Man 324 NF,, Man 324 NF PRITARDER, MB 325.0, 325.2, SAE J 814.

UV marker! At the customer’s request, the composition of GLICAR G11 Radiator Fluid Concentrate can be enriched with a UV marker. It is a UV dye that is completely neutral to its physical and chemical properties and gives the liquid a glowing effect under UV light. Diagnosing the tightness of the cooling system with such “marked” fluid is child’s play, even for a layman. It is enough to illuminate the darkened radiator and other elements of the cooling system with UV rays, e.g. from a pocket flashlight or a banknote tester, to obtain a clear leak test result. Even the smallest leak hidden in the nooks and crannies of the system will not be hidden when we have a diagnostic tool such as a UV marker in the coolant. There is also no way to confuse a leak from the radiator with other fluids present under the hood of the car. The suspicious substance either glows in UV light and is clearly fluid from the cooling system, or it is a fluid from another source that does not contain a tracer. The manufacturer recommends using a UV marker for each cooling system.

Color. Antifreeze coolant Glicar G11 Concentrate is available in blue. The color of the liquid is obtained by adding natural mineral pigments. Pigments are completely neutral to the physical and chemical properties of the product. Pigments that give the product a blue color can be replaced with others at the customer’s request. The product may be colored yellow or green. Sometimes, cultural conditions or local legal regulations, especially in non-European markets, require the delivery of a product with a specific color required by the customer. Then, the possibility of dyeing the concentrate in a color other than the standard one may be a prerequisite for gaining a new customer or even a new market.

The coolant obtained by diluting the GLICAR G11 Radiator Fluid Concentrate can be used in radiators made of brass, copper (including soldered ones) and aluminum.

Application

Application:

The product obtained after diluting the GLICAR G11 Radiator Fluid Concentrate can be successfully used in a wide range of combustion engines:

motorcycles,
passenger cars,
buses and delivery vans,
trucks,
buses,
construction machines and equipment,
tractors and agricultural machinery,
modern and historical military vehicles,
stationary engines.

GLICAR G11 Radiator Fluid obtained by diluting the GLICAR G11 concentrate can be used in cooling systems of combustion engines powered by traditional fuels – gasoline, diesel oil, LPG, but can be used to cool engines with less conventional fuel. Only if such an engine requires a fluid that has and meets the standards for GLICAR G11 radiator fluid. A full list of standards held and met in the “Advantages” tab.

Advantages

Advantages:

Concentrated formula, the product in the form of a concentrate takes up less space in the warehouse and is easier to transport because there is simply less of it.
Glycerin free.
Protects the cooling system against freezing down to -35°C.
Protects the system against corrosion of metal elements.
Protects rubber components, seals and gaskets against premature wear.
It does not foam both when filling the system and during its operation. This completely eliminates problems resulting from the presence of foam in the system.
It protects against the formation of mineral deposits and scale in the cooling system.
Approved for use in cooling systems made of most commonly used materials, such as:
- aluminum,
- brass,
- copper (including soldered).
Available in colors:
- blue,
- green,
- yellow.
At the customer’s request, it may contain a UV marker.
It meets the standards:
- PN93/C-40008-10;
- PN-C-40007;
- ASTM D 5931-13;
- ASTM D 1287-11;
- PN 93/C-40008-05;
- PN-C-4008-06:1993/AZ 1:2000
It meets the requirements of standards:
- AUDI/SEAT/SKODA/VW TL 774 C,
- ASTM D3306,
- BS 6580:2010,
- ASTM D 4985,
- ASTM D 5345,
- ASTAM D 2570,
- ANFOR NF R 15-601,
- DAF 74001,
- Man 324 NF,, Man 324 NF PRITARDER,
- MB 325.0,
- MB 325.2,
- SAE J 814.

Dilution

Dilution:

Antifreeze coolant Glicar G11 Concentrate is not a ready-to-use product. Before use, dilute it with demineralized water in a 1:1 ratio.

How to prepare with a mixture of concentrate and demineralized water in a 1:1 ratio?

Each of us intuitively feels what a 1:1 mixture means.

How to do it right?

The simplest way is to add the same amount of demineralized water to one unit of concentrate volume. For example, one liter of demineralized water should be added to one liter of concentrate. Both liquids should be mixed thoroughly before pouring into the cooling system. This operation is best performed in a transparent or at least open-up container. It is important to be able to control the color of the mixture until a uniform color of the liquid is obtained. Then we can be sure that the ingredients of the concentrate are evenly distributed throughout the entire volume of the resulting liquid.

The manufacturer strongly advises against preparing mixtures with proportions other than those recommended. Too thick a mixture may overload the cooling system and expose its components to excessive wear. A mixture with too high a water content will not effectively protect the system against low temperatures, sediment formation, etc. Too low a concentration of corrosion inhibitors may lead to corrosion damage to the system.

The manufacturer recommends using only demineralized water of confirmed high quality. Replacing demineralized water with tap water, mineral water or drinking water may lead to the creation of an inferior product. Demineralized water has a predictable, repeatable composition. Tap, mineral and drinking water contains various admixtures, additives and impurities. These substances may react with the ingredients of the concentrate and, as a result, the finished mixture obtained from such an intermediate may not have all the technologically necessary features of the product. Replacing demineralized water with other water is like replacing parsley in broth with carrot leaves. They seem to be both, parsley and green, but we intuitively feel that they are not the same.

Packaging and Labels

Packaging and Labels:

We offer Antifreeze coolant Glicar G11 Concentrate in a wide range of retail and wholesale packaging. Depending on the customer’s preferences, the product can be packaged in the following packages:

1-liter bottle – 12 pieces in shrink wrap*, 720 pieces on a EURO pallet.
5-liter canister – 4 pieces in shrink wrap*, 140 pieces on a EURO pallet.
20-liter canister – 42 pieces on a EURO pallet.
60 l canister – 12 pieces on a EURO pallet.
200 l barrel – 1 pc on a half pallet, 2 pcs on a EURO pallet.
1000 l IBC.
Bulk in a tank truck/tank container.

We can provide other packaging upon request. It is also possible to label packages with the customer’s label or prepare a label in the language of the destination country.

* Upon customer’s request, the shrink-wrapped pack can be replaced with a cardboard box.

Shrink-wrapped packs, cardboard boxes, and canisters are placed on a collective pallet and secured with stretch film.

Transportation and Precautions

ARD product: NO

Hazard Statement:

H302 Harmful if swallowed.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary statements:

Prevention:

P102 Keep away from children.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash your hands thoroughly after use.
P270 Do not eat, drink or smoke when using this product.

Response:

P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P314 If you feel unwell, seek medical advice/attention.

Removal:

P501 Dispose of the contents/container to a hazardous or special waste collection point.

It contains: Ethylene glycol (Etano-1,2-diol).

MSDS

TDS

Automotive Chemistry Department

+48 733 525 533