Name: Heat Transfer Fluid, GLITHERM EKO CONCENTRATE
SKU: Gli-0016
Availability: InStock

UV addition

GLITHERM ECO heat transfer fluid concentrate in IBC, capacity 1000L

GLITHERM ECO CONCENTRATE at a glance:

Concentrated formula.
Easier to transport.
Easier to store.
Possibility of preparing the mixture according to individual needs.
Non-toxic, environmentally and human friendly.
It has the Hygienic Certificate of the National Institute of Hygiene and the Technical Recommendation of the Building Research Institute.
It does not contain glycerin and alcohols.
Provides anti-corrosion protection and prevents sedimentation.
Prevents the growth of microorganisms.
5 years warranty

Kolor podstawowy:

Inne dostępne kolory:

Dostępne opakowania:

Clear

SZCZEGÓŁY

GLITHERM ECO CONCENTRATE Heat Transfer Fluid is not a ready-to-use product. Glitherm ECO concentrate must be diluted with demineralized water before use. Do not use undiluted product due to its high density, high concentration of Glycol and lack of protection against freezing. For more information on the dilution process and the preparation of ready-made solutions, see the “Dilution” section. If you want to learn more about it, click on the appropriate tab above.

Heat Transfer Fluid GLITHERM ECO CONCENTRAT is a modern, highly concentrated monopropylene glycol (MPG) concentrate that meets the highest quality standards. GLITHERM ECO concentrate is designed for quick and convenient preparation of mixtures of standard Heat Transfer Fluids as well as mixtures prepared on the basis of individual customer needs. The concentrated formula of the product is especially recommended wherever transport and/or storage costs have a significant share in overall costs. The concentrated product takes up less space during transport and storage. The total cost of transport/storage is therefore better distributed per unit of the finally obtained solution of the working liquid. The Glitherm Eco Heat Transfer Fluid Concentrate allows you to place an order when, for example, the concentration of glycol in the working fluid or the minimum operating temperature of the working fluid are not yet specified. Using the concentrate, you can obtain several different working fluids with different concentrations of glycol for different installations on one or more investments. This facilitates logistics and reduces the risk of mistakes in delivering a ready-made fluid with a different glycol concentration to the wrong investment.

The highest quality of Glitherm ECO Heat Transfer Fluid Concentrate is confirmed by:

Technical Recommendation of Building Research Institute in Warsaw.
Hygienic certificate of the PZH – of the National Institute of Public Health – National Research Institute.

GLITHERM ECO concentrate is produced on the basis of primary, and therefore the highest quality, Mono Propylene Glycol (MPG), which is not the result of recycling. The use of Propylene Glycol, an ecological and environmentally friendly raw material, made it possible to create a product whose mixtures do not pose a threat. Possible emergency unsealing of the installation or insufficiently careful handling of the concentrated product or its mixtures does not pose a threat to the health and life of the personnel or users, as well as to the natural environment. There are no threats to nearby watercourses, groundwater or other elements of the environment, which must be carefully observed when using products based on ethylene glycol.

The enrichment of the concentrate recipe with additives, corrosion inhibitors and modern anti-foaming agents guarantees that the mixtures prepared on the basis of this product will ensure long and trouble-free operation of each installation. The product does not foam when filling the installation and during its operation, thus eliminating all problems related to the presence of dispersion mixtures. Mixtures made on the basis of Glitherm ECO Concentrate provide durable and effective protection of installations against corrosion, precipitation and the formation of deposits. They keep the installation clean. Although the mixture does not contain toxic components in significant amounts, it completely protects against the development of microorganisms inside the installation. It does not contain admixtures of glycerin and alcohols. Mixtures made from the concentrate can be used for many years. The manufacturer guarantees up to 5 years of trouble-free operation of mixtures prepared and used in accordance with the guidelines.

UV marker. GLITHERM ECO Heat Transfer Liquid Concentrate can be enriched with an additive, a UV marker. This additive has no effect on the physicochemical properties of the final product and the mixtures obtained from it. The addition of a UV marker causes the working liquid to glow under the influence of UV radiation. This is invaluable help in detecting possible leaks or leaks in the installation. While large leaks are easy to locate, smaller ones can cause problems. The more so that they are most often located in hard-to-reach places, at the joints of elements, etc. When using a UV marker, it is enough to darken a given part of the installation and illuminate it with UV rays from, for example, a small pocket flashlight. Leakage or lack of it will then be clearly visible. This is an easy way to tell if there is a leak or not, even for the layman. Convincing, for example, the investor or persons representing him about the tightness of the installation in the case of using a UV marker is trivial. Installation tightness testing using a UV marker can be carried out while the installation is being used by the user without the participation of the service team. Such an installation tightness test may become, for example, a routine element of facility inspection by the investor’s or user’s internal services. The manufacturer recommends using a UV marker for each installation.

Basic color and available colors. GLITHERM ECO CONCENTRATE Heat Transfer Fluid is offered in green as standard. The color of the concentrate is the result of the use of a completely neutral pigment, it does not affect the physicochemical properties of the product. The pigment used can be replaced with another, enabling the production of concentrates in various colors, from pink through yellow, blue to violet, on special customer request. The color of the working fluid may seem like an insignificant feature of the finished product. However, the differentiation of ordered colors of GLITHERM ECO Concentrates is particularly appreciated when it is necessary to distinguish between materials ordered for several simultaneously serviced investments. A glance at the warehouse is enough to know which material to fail for which investment, which of the works managers has already collected its material, and which is still in the warehouse. Sometimes, especially in markets other than our home country, the color must comply with local laws and regulations or take into account the local cultural context. Then the possibility of changing a color, e.g. in Asia, from an unlucky one to one that will ensure prosperity for future users may turn out not to be a whim, but a key game in negotiations with a partner coming from a culture different from Europe.

ATTENTION! Do not use mixtures of GLITHERM ECO Concentrate in installations containing galvanized elements. Product mixtures are compatible with the majority of materials commonly used in installations, such as: steel, cast iron, aluminum, copper, copper alloys, brass. Glitherm ECO Heat Transfer Fluid Concentrate solutions can be successfully used in brazed installations.

Application

Application:

GLITHERM EKO Heat Transfer Fluid Concentrate can be used to prepare mixtures, working fluids used in:

Solar collectors.
Industrial HVAC installations.
Heating installations.
Central heating installations.
Sprinkler systems.
Refrigeration and air-conditioning installations.
Ground and monoblock heat pumps.
Renewable energy sources.
Installations in the food industry without direct contact with food.

Advantages

Advantages:

Concentrated formula.
Due to the high glycol content compared to ready-to-use liquids, the concentrate takes up less space in transport and storage. The cost of transport and storage is more favorable per unit package of diluted working fluid than in the case of ready-to-use fluids.
The high concentration of Glycol makes it possible to prepare a solution with an individual composition dedicated to a given installation.
The ability to prepare the working liquid on site, just before filling the installation, allows you to order the concentrate at an earlier stage of the investment, when, for example, information on the final composition of the mixture is not yet known.
Possibility of using the same batch of ordered Glitherm ECO Concentrate in different installations with different final compositions. From the concentrate, both a solution containing 51% Glycol and one containing 26% Glycol can be prepared.
It has the ITB Technical Recommendation.
It has the Hygienic Certificate of the National Institute of Hygiene.
Protects the installation against corrosion.
Prevents the formation of deposits.
Keeps the installation clean.
It inhibits the development of microbial life.
It can be enriched with a UV marker.
It does not foam.
Ensures effective operation and temperature control in systems.
It is non-toxic and ecological.
Protects against soil and groundwater contamination.
It is safe for human life and health and the natural environment.
It does not contain glycerin and alcohol additives.
It contains only virgin raw materials, not derived from regeneration processes.
It is a multi-season agent.
Keeps the installation in good condition for years of use.
Increasing the pressure leads to an increase in the boiling point.
It has a 5-year manufacturer’s warranty.
Can be dyed any color pink, green, blue, yellow, purple.

Dilution

Dilution:

GLITHERM ECO Heat Transfer Fluid Concentrate is not a ready-to-use product. Before filling the system, dilute it with demineralized water.

The manufacturer recommends using only demineralized water for dilution of GLITHERM ECO Concentrate. The use of tap water, process water or water from a fire protection system may significantly deteriorate the properties of the final solution. Demineralized water has a predictable, stable composition. It does not contain undesirable minerals and other admixtures in the Heat Transfer Fluid. Tap water, even the food water – and perhaps above all the food water – contains a lot of purifying additives that are desirable for our bodies, but do not necessarily “like” the installation we are going to fill. Water of unknown composition may contain, for example, minerals that will start to precipitate sediment or significantly reduce the pH buffer, etc. Replacing demineralized water with tap water can be compared to replacing table salt with road salt. Apparently the soup will still be salty, but it’s hard to ignore the sand grinding in the teeth and the aftertaste of mud. If it is known in advance about possible problems with the availability of demineralized water of satisfactory quality on a given investment, it is worth considering purchasing a ready-to-use liquid instead of the Concentrate.

The manufacturer recommends the following proportions of water and concentrate to obtain mixtures dedicated to the following minimum operating temperatures:

Dedicated minimum temperature for a given mix in °C	% Concentrate*	% Demineralized Water*
-35°C	53	47
-30°C	49	51
-25°C	45	55
-20°C	41	59
-17°C	37	63
-15°C	35	65

* Volume percentage.

To obtain a mixture dedicated to work down to -35°C, mix 53 parts of concentrate and 47 parts of demineralized water.

To obtain a mixture dedicated to work down to -30°C, mix 49 parts of concentrate and 51 parts of demineralized water.

To obtain a mixture dedicated to work down to -25°C, mix 45 parts of the concentrate and 55 parts of demineralized water.

To obtain a mixture dedicated to work down to -20°C, mix 41 parts of concentrate and 59 parts of demineralized water.

To obtain a mixture dedicated to work down to -17°C, mix 37 parts of concentrate and 63 parts of demineralized water.

To obtain a mixture dedicated to work down to -15°C, mix 35 parts of concentrate and 65 parts of demineralized water.

If you need a different minimum working temperature of the mixture in the filled installation than the above. The concentration and ratio of water and concentrate cannot be calculated from a simple proportion on the so-called “peasant reason”. If the minimum temperature at which the Heat Transfer Fluid is to work in your installation is not in the above list, the manufacturer strongly advises against setting this value yourself. Dilution of Glitherm ECO Concentrate for non-standard minimum operating temperatures should be consulted with Customer Service. Experts, technologists of the manufacturer will carry out appropriate calculations and present a dedicated individual solution.

How to correctly interpret the data in the table?

How to prepare a mixture that is actually intended to work at a given minimum temperature?

If the minimum working temperature of the mixture is in the materials above, its preparation is relatively simple. Apparently, each of us knows something about percentages, but how does it work in practice? How to prepare a GLITHERM ECO Concentrate, e.g. a Heat Transfer Fluid down to -35°C with a Glycol concentration of 51%.

To prepare such a solution, mix 53% of Glitherm ECO Concentrate with 47% of demineralized water, according to the table. So we measure 53 equal parts by volume of GLITHERM ECO Concentrate – e.g. 53 liters – and 47 equal parts by volume of demineralized water – e.g. 47 liters. The products measured in these proportions are mixed together until a uniform color of the mixture is obtained. In this way, we obtain a mixture whose minimum operating temperature is -35°C, Glycol concentration 51%. We obtain every other mixture in the same way. We replace the percentages with equal volume parts of the measured concentrate and demineralized water.

Packaging and Labels

Packaging and Labels:

We offer GLITHERM ECO Antifreeze Concentrate in a wide range of retail and wholesale packaging. Depending on the customer’s preferences, the product can be packaged in the following packages:

5 l canister – 60 pcs on a half pallet, 140 pcs on a EURO pallet.
10 l canister – 27 pcs on a half-pallet, 60 pcs on a EURO pallet, 75 pcs on an industrial pallet.
20 l canister – 12 pcs on a half-pallet, 42 pcs on a EURO pallet, 48 pcs on an industrial pallet.
30 l canister – 12 pcs on a half-pallet, 24 pcs on a EURO pallet, 32 pcs on an industrial pallet.
60 l canister – 4 pcs on a half-pallet, 12 pcs on a EURO pallet, 12 pcs on an industrial pallet.
200 l drum – 1 pcs on a half pallet, 2 pcs on a EURO pallet, 4 pcs on an industrial pallet.
220 l drum – 1 pcs on a half-pallet, 2 pcs on a EURO pallet, 4 pcs on an industrial pallet.
1000 l IBC
Bulk in a road tanker/tank container/flexi tank.

We can provide other packaging upon request. It is also possible to label packages with the customer’s label or prepare a label in the language of the destination country.

The canisters are packed on a collective pallet and secured with stretch foil.