GLICAR G12+ is a modern Long Life coolant concentrate based on HOAT (Hybrid Organic Acid Technology), combining the advantages of both OAT (Organic Acid Technology) and IAT (Inorganic Additive Technology). The product is manufactured using virgin monoethylene glycol (MEG) and is free from glycerin.
After dilution with demineralized water at a 1:1 ratio, it provides long-lasting protection against corrosion, deposits, and scale formation, ensuring reliable cooling system performance.
Applications
The coolant prepared from GLICAR G12+ Concentrate is suitable for cooling systems in:
- passenger cars,
- vans, minibuses, and light trucks,
- motorhomes,
- trucks,
- tractor units,
- buses,
- motorcycles, ATVs, and recreational vehicles,
- construction machinery,
- agricultural machinery and tractors,
- military and special-purpose vehicles,
- power generators and stationary engines.
Suitable for gasoline, diesel, and LPG-powered engines.
Material compatibility
The coolant prepared from GLICAR G12+ Concentrate is suitable for cooling systems made of:
- aluminum,
- copper,
- brass,
- soldered radiators.
Its advanced formula protects metal, rubber, and plastic components, ensuring long-term, trouble-free operation of the cooling system.
Directions for Use
GLICAR G12+ Concentrate is not a ready-to-use product and must be diluted with demineralized water at a 1:1 ratio before use.
Mixing example:
- 1 liter of concentrate + 1 liter of demineralized water = 2 liters of ready-to-use coolant.
Only high-quality demineralized water should be used. Maintaining the recommended 1:1 mixing ratio is essential. Using the concentrate undiluted or excessively diluting the mixture may reduce cooling system protection, increase the risk of corrosion, and negatively affect heat transfer performance.
UV Leak Detection Additive
Upon request, the concentrate can be enhanced with a UV tracer dye, allowing quick and accurate detection of cooling system leaks using a UV lamp. The additive does not affect the product’s performance and significantly reduces diagnostic time.
Available Colors
GLICAR G12+ Concentrate is supplied as standard in yellow.
A red version is also available upon request. The color is achieved using high-quality pigments that do not affect the physical or chemical properties of the product.
CLP Classification and Labeling
Always read the information provided on the product label before use.
Substances that contribute to the classification Ethanediol.
Hazard Statements
Acute Tox. 4: H302 – Harmful if swallowed.
STOT RE 2: H373 – May cause damage to organs through prolonged or repeated exposure (Oral).
Precautionary Statements
P102: Keep out of reach of children.
P260: Do not breathe mist/vapours/spray.
P264: Wash hands thoroughly after handling
P270: Do not eat, drink or smoke when using this product.
P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P501: Dispose of contents/container according to the separated collection system used in your municipality.
UFI: 3D10-10S9-M00E-EGMA
Instructions for use:
- Dilute the concentrate with demineralized water in a 1:1 volume ratio.
- Before filling, drain and flush the cooling system with clean water.
- Pour directly into the cold cooling system through the expansion tank.
- The level should be between the MIN and MAX marks.
- Start the engine and wait until the operating temperature is reached, then switch it off and allow it to cool down. After cooling, check the fluid level and top up if necessary.
Note: The fluid replacement interval is specified in the vehicle owner’s manual.
Please send me the product’s technical documentation:
+48 733 525 533
dsc@glitherm.com
