CHARACTERISTICS

The highest quality confirmed by the manufacturer’s warranty for 5 years
Concentrated formula
Freezing point -36ºC after dilution 1:1 with demineralized water
Only primary raw materials are used in production
Protects metal elements of the cooling system against corrosion
It does not foam, both when filling the system and during its operation
Free from toxic nitrites, amines and phosphates
Based on HOAT technology
Complies with the standards: VW GROUP (AUDI, SEAT, SKODA, VOLKSWAGEN) TL-774 J; ASTM D 3306; BS 6580:2010; PN93/C-40008-10; PNC- 40007; ASTM D 5931-13; ASTM D 1287-11; PN 93/C-40008-05; PN-C-40008-06:1993/AZ 1:2000

Available packages:

SZCZEGÓŁY

GLICAR G13 is a high-quality coolant concentrate designed for modern engine cooling systems. The product is not ready to use and must be diluted with demineralized water at a 1:1 ratio before use. When properly prepared, it provides reliable protection against freezing down to -36°C, corrosion, cavitation, deposits, and premature wear of cooling system components.

Applications
The coolant prepared by diluting GLICAR G13 Concentrate is suitable for cooling systems in:

passenger cars,
light commercial vehicles,
trucks,
buses,
motorcycles and ATVs,
construction machinery,
agricultural machinery and tractors,
military and special-purpose vehicles,
generator sets and stationary engines.

Suitable for gasoline, diesel, and LPG-powered engines.

Material Compatibility
The coolant prepared from GLICAR G13 Concentrate is compatible with cooling systems made of:

aluminum,
cast iron,
steel,
mixed-metal cooling systems.

Its advanced Hybrid Organic Acid Technology (HOAT) formula provides long-lasting protection for metal, rubber, and plastic components against corrosion, cavitation, and pre

Dilution
GLICAR G13 Concentrate is not a ready-to-use product. Before use, it must be diluted with demineralized water at a 1:1 volume ratio.
Example:

1 litre of concentrate + 1 litre of demineralized water = 2 litres of ready-to-use coolant.

For optimum performance, use only high-quality demineralized water and always maintain the recommended 1:1 mixing ratio.

UV Leak Detection Additive
Upon customer request, the concentrate can be enhanced with a UV tracer, making it easy to detect cooling system leaks using a UV lamp. The additive does not affect the product’s performance and significantly reduces diagnostic time.

Available Colors
GLICAR G13 Concentrate is supplied in violet as standard.
The color is achieved using high-quality mineral pigments that are completely neutral to the product’s physical and chemical properties.

CLP Classification and Labelling
Always read the information provided on the product label before use.
Substances that contribute to the classification Ethanediol.

Hazard Statements
Acute Tox. 4: H302 – Harmful if swallowed.
STOT RE 2: H373 – May cause damage to organs through prolonged or repeated exposure (Oral).
Precautionary Statements
P102: Keep out of reach of children.
P260: Do not breathe mist/vapours/spray.
P264: Wash hands thoroughly after handling
P270: Do not eat, drink or smoke when using this product.
P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P501: Dispose of contents/container according to the separated collection system used in your municipality.

UFI: S440-70V0-E008-KE8D

Instructions for use:

Dilute the concentrate with demineralized water in a 1:1 volume ratio.
Before filling, drain and flush the cooling system with clean water.
Pour directly into the cold cooling system through the expansion tank.
The level should be between the MIN and MAX marks.
Start the engine and wait until the operating temperature is reached, then switch it off and allow it to cool down. After cooling, check the fluid level and top up if necessary.

Note: The fluid replacement interval is specified in the vehicle owner’s manual.

QR Glicar G13 coolant concentrate

Please send me the product’s technical documentation:

Additional information

BASE COLOR: Blue.
OTHER COLORS AVAILABLE: Green, yellow.
AVAILABLE PACKAGING: 1L bottle; 5L canister; 20L canister; 60L canister; 200L barrel; IBC/IBC 1000L; Bulk in a tanker/tank container.
AVAILABLE EXTRAS: UV additive.
PRIVATE BRAND: Possibility to apply customer labels.

Use

GLICAR G11 radiator fluid is used in cooling systems:

motorcycles,
scooters,
passenger cars,
delivery vans,
trucks,
buses,
construction machinery,
agricultural machinery,
tractors and farm machinery,
military and special-purpose vehicles,
stationary engines.

Advantages

Does not contain glycerin.
Does not freeze. It protects the system against low temperatures down to -35°C.
Protects the system against corrosion.
Protects seals and gaskets from excessive wear.
Preserves and extends the lifespan of both metal and rubber or plastic components of the cooling system.
It does not foam.
It protects the system against scaling and sediment formation.
Designed for use in systems made of most commonly used materials such as:
- aluminum,
- brass,
- copper.
Approved for use in soldered systems.
Available in colors:
- blue,
- green,
- yellow.
May contain UV tag.
It meets the standards:
- PN93/C-40008-10;
- PN-C-40007;
- ASTM D 5931-13;
- ASTM D 1287-11;
- PN 93/C-40008-05;
- PN-C-40008-06:1993/AZ 1:2000.
It meets the requirements of standards:
- AUDI/SEAT/SKODA/VW TL 774 C;
- ANFOR NF R 15-601;
- ASTM D 2570;
- ASTM D 3306;
- ASTM D 4985;
- ASTM D 5345;
- BMW GS 94000;
- BMW N 600 69,0;
- BS 6580:2010;
- DAF 74001;
- Man 324 NF;
- Man 324 NF PRITARDER;
- MB 325.0;
- MB 325.2;
- SAE J814.