Glicar G12++ coolant concentrate

GLICAR G12++ is a premium-quality coolant concentrate developed using Si-OAT (Silicated Organic Acid Technology). Its advanced formula, based on monoethylene glycol (MEG), organic corrosion inhibitors, and stabilized silicates, provides long-lasting protection of the cooling system against corrosion, cavitation, overheating, deposits, and premature component wear. The product is designed for modern gasoline and diesel engine cooling systems requiring G12++ specification coolant.

Applications
Coolant prepared by diluting GLICAR G12++ Concentrate is suitable for the cooling systems of:

• passenger cars,
• light commercial vehicles,
• trucks,
• buses,
• motorcycles and ATVs,
• construction machinery,
• agricultural machinery and tractors,
• military and special-purpose vehicles,
• generators and stationary engines.

Suitable for gasoline, diesel, and LPG-powered engines.

Material Compatibility
The coolant prepared from GLICAR G12++ Concentrate is suitable for cooling systems made of:

• aluminium,
• aluminium alloys,
• copper,
• brass,
• soldered radiators,
• modern plastics and elastomers.

Advanced Si-OAT technology provides effective protection for metal components, seals, and coolant hoses while maintaining excellent heat transfer efficiency and minimizing deposit formation.

Dilution
GLICAR G12++ Concentrate is not a ready-to-use product. Before use, it must be diluted with demineralized water at a 1:1 ratio.
Example:

• 1 litre of concentrate + 1 litre of demineralized water = 2 litres of ready-to-use coolant.

For optimum cooling system performance, use only high-quality demineralized water and maintain the recommended 1:1 mixing ratio. Using undiluted concentrate or incorrect dilution ratios may reduce the effectiveness of cooling system protection.

UV Leak Detection Additive
Upon customer request, the concentrate can be enhanced with a UV tracer, allowing quick detection of cooling system leaks using a UV lamp. The additive does not affect the product’s performance and significantly reduces diagnostic time.

Available Colours
GLICAR G12++ Concentrate is supplied as standard in lilac.
The colour is achieved using high-quality pigments that are neutral to the product’s physicochemical properties.

CLP Classification and Labelling
Always read the information provided on the product label before use.
Substances that contribute to the classification Ethanediol; Sodium 3,5,5-trimethylhexanoate.

Hazard Statements
Acute Tox. 4: H302 – Harmful if swallowed.
Eye Irrit. 2: H319 – Causes serious eye irritation.
Skin Irrit. 2: H315 – Causes skin irritation.
STOT RE 2: H373 – May cause damage to organs through prolonged or repeated exposure (Oral).

Precautionary Statements
P102: Keep out of reach of children.
P260: Do not breathe mist/vapours/spray.
P264: Wash hands thoroughly after handling
P270: Do not eat, drink or smoke when using this product.
P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of contents/container according to the separated collection system used in your municipality.

UFI: 9960-W03X-200M-3XU0

Instructions for use:

• Dilute the concentrate with demineralized water in a 1:1 volume ratio.
• Before filling, drain and flush the cooling system with clean water.
• Pour directly into the cold cooling system through the expansion tank.
• The level should be between the MIN and MAX marks.
• Start the engine and wait until the operating temperature is reached, then switch it off and allow it to cool down. After cooling, check the fluid level and top up if necessary.

Note: The fluid replacement interval is specified in the vehicle owner’s manual.

Please send me the product’s technical documentation: