GLICAR G12+ antifreeze concentrate is not a ready-to-use product. Before application, the concentrate should be diluted in a 1:1 volume ratio with demineralized water. The manufacturer strongly advises against the use of undiluted concentrate and liquid with excessive amounts of demineralized water. A liquid prepared in different proportions of concentrate and demineralized water than recommended by the manufacturer may not have all the necessary functional properties. You can find more about dilution and preparation of the finished mixture in the “Dilution” tab.
GLICAR G12+ Antifreeze Coolant Concentrate is a product with a concentrated formula. GLICAR G12+ antifreeze concentrate allows you to obtain an excellent quality ethylene glycol-based coolant with a long life – Long Life. In the production of GLICAR G12+ CONCENTRATE, a modern hybrid technology of organic acids HOAT was used, combining the advantages of organic OAT and inorganic IAT technology. The product formula, enriched with numerous anti-corrosion additives and refiners, ensures full corrosion protection of metal elements and preserves and protects plastic and rubber elements against premature wear. Anti-foaming additives eliminate problems associated with the occurrence of foam in the system. The liquid prepared on the basis of GLICAR G12+ Concentrate meets the requirements for low-freezing fluids and crystallizes only at -37°C. The product does not cause limescale and protects against precipitation. Keeps the system clean. Does not contain glycerin. It can be used in cooling systems: motorcycles, footbridges and other recreational vehicles, in cars and trucks, tractor units, buses, construction equipment, tractors and agricultural machinery, military vehicles and equipment. GLICAR G12+ radiator fluid can be used in stationary engines, e.g. power generators, field power stations, etc. It mixes perfectly with other products that meet the G12 and G12+ standards.
The standards met and held by the radiator fluid were created on the basis of the GLICAR G12+ Concentrate
The product has the following standards: PN93/C-40008-10; PN-C-40007; ASTM D 5931-13; ASTM D 1287-11; PN 93/C-40008-05; PN-C-40008-06:1993/AZ 1:2000. Meets the requirements for AUDI/SEAT/SKODA/VW TL 774 D/F(G12, G12+), ASTM D3306, BS 6580:2010, Afnor NF R 15-601 TYPE 1, ASTM D1384, ASTM D2570, ASTM D2809, ASTM D 4340, ASTM D 4985, ASTM D6210, CATERPILAR MAK A4.05.09.01, CUMMINS CES 14439, CUMMINS CES 14603, DAF 74002, FORD WSS-M97-844 D, JOHN DEERE JDM H5, KOMATSU AF-NAC, SCANIA TI 02-980813 T/B/MGM 6277M, DETROIT DIESEL 93K217 and Man 324 SNF,, MB 325.3, MTU MTL 5048 , RENAULT 41-01-001/- S-TYPE D, VOLVO COOLANT VCS, GM 6277M.
UV Additive
At the customer’s request, the product recipe can be enriched with UV dye. This additive causes the GLICAR G12+ car radiator fluid to glow under UV light. This makes cooling system leak diagnostics a simple, quick operation. It is enough to illuminate a darkened part of the installation with light containing the UV spectrum to clearly determine the tightness of the system or its unsealing. Even small leaks, located in hard-to-reach places, will not hide when we have a coolant with a UV additive. This makes it easier and significantly reduces the time needed to diagnose the cooling system. The UV additive remains neutral to the physicochemical properties of the coolant. The manufacturer recommends the use of a liquid with a UV additive for all cooling systems.
Colour
GLICAR G12+ radiator fluid concentrate is available in yellow as standard. The colour is obtained by adding mineral pigments – completely neutral to the physicochemical properties of the product. On request, the product can be stained red.
REMARK
The coolant obtained on the basis of GLICAR G12+ Antifreeze Coolant Concentrate can be used in internal combustion engines equipped with both brass (copper) brazed and aluminum radiators.
+48 733 525 533
dsc@glitherm.com
